■Automatic Flasher

The Safe and Easy Way to Automatically Flash any stubborn Old Generator

Another Innovative Product Made for The Generator Field Technician

The SS500 Automatic Flashing Module is a true electronic flashing circuit with a latching timeout circuit that can be set from 1 to 8 seconds timer. This uint will not flash again as the generator is turn off.

When the residual voltage is too low for the voltage regulator to build voltage normally on the generator the SS500 is what you need. The SS500 uses battery voltage and the output of the generator to automatically flash the generator for 1 to 8 seconds and then stop. The cycle is repeated every time you start the generator, normally a signal from the ignition switch or any convenient oil pressure sender or push button start the swquence.

Current limiting resistors and safety diodes are included.