The ECU-02 Generator Control module is used to start and stop a generator-set automatically. In addition to its automatic start-stop function, the module monitors any problems related to engine/generator performance and gives the operator digital readouts for all working parameters. The module will, by design, stop the engine and diagnose engine/generator failures on a large, easy-to-read 4 digit/7-segment front display panel with flashing, light emitting diodes (LED's). Remote starting is accomplished via standard, two-wire signals from any Automatic Transfer Switch or remote switch. Model ECU-02 also includes a generator overload protection.

The module also features easily adjustable operational sequences, timers and alarm trips. These customizations can be programmed easily by the customer via the rear and front display panel. These are the buttons (PROM on rear, + and - on the front). There is no need for a PC connection and programming software. Any and all changes can be made in the field.